A refit to the owner’s wishes at Werft 52 on Lake Constance: a wider swim platform, a door and a comfortable stair to the aft deck, a quieter pump and toilet, new switching technology, lighting and, if wanted, a quiet electric drive.
In short
- At Werft 52, refit means renovating a yacht entirely to its owner’s wishes, from a partial renovation, of the electrics alone for example, to a complete overhaul, in steel, GRP and wood.
- The wishes the yard lists on its website are mostly about the stern and quiet on board: a swim platform that is too narrow, no door to the platform, an awkward stair, a noisy fresh water pump and toilets that are too loud.
- The yard’s own boatbuilder and its own boat painter work on site, and owners who want it quieter still can have their boat converted to an electric drive from ePropulsion or Mercury Avator.
When the yacht is almost perfect
Many owners know the feeling. The yacht is essentially the right one, but a few things annoy them again every summer. The swim platform is too narrow, the stair to the aft deck is awkward, and the pump kicks in loudly as soon as someone opens a tap. That is what a refit is for. Werft 52, on the Swiss shore of Lake Constance, describes it on its page on restoration and conversions as the renovation of a yacht entirely to its owner’s wishes.
How far a refit goes is up to the owner. It can be a partial renovation that covers only the electrics, for example, or a complete overhaul. Werft 52 AG carries out this work in steel, GRP and wood and lists more than 15 refit projects and over 8 restorations on its website. Almost anything is possible, the yard says, from a technical upgrade to an aesthetic finish. Its owner André Vrecer compares the work to restoring a classic car: a boat that barely floats and runs becomes a new one again.
What bothers owners on board
On the same page the yard asks its customers directly what bothers them about their yacht. The answers read like an honest log of life on board:
- The swim platform is too narrow.
- There is no door to the swim platform.
- The stair to the aft deck is awkward.
- The fresh water pump makes too much noise when someone uses the tap.
- The toilets are too loud.
- The canopy causes trouble when it is closed.
- The fenders get in the way when they are stowed.
- The switching technology is outdated.
- The yacht is too slow, cannot make headway against a river’s current or cannot cope with waves and wind.
None of these is a reason to sell the boat. Each of them can spoil a day on the water, though, and together they turn a good boat into one you no longer really look forward to. This is exactly where a refit comes in.
The swim platform: more room at the stern
Almost every swimming day starts and ends at the stern. This is where you climb into the water and out again, where you come aboard from the tender, and where you sit in the evening with your feet above the lake. A platform that is too narrow makes all of that hard work. The yard’s refit photos show what the answer can look like: a new, generous teak swim platform with a stair and handrails in stainless steel.
The way there belongs to the platform too. Without a door, every trip to the water becomes a climb over the rail. That is also on the owners’ list, and it too can be changed in a refit.
The stair to the aft deck
No fitting on board is used as often as the stair: when swimming, when mooring, with bags and a cool box in your hands. If it is steep or narrow, you notice every time. In the yard’s pictures, new stairs in stainless steel with teak treads lead from the swim platform up to the deck, with handrails on both sides.
Quiet on board: pump, toilet and drive
Noise is more disturbing on the water than on land, because it is otherwise so quiet out there. Two points on the list are about exactly that: a fresh water pump that makes too much noise every time someone reaches for the tap, and toilets that are too loud. Both are among the wishes a refit can fulfil without touching the whole boat.
Owners who want to go further think about the drive. Werft 52 is a dealer for ePropulsion and carries Mercury’s Avator electric outboards. It offers complete conversions, retrofits and service for electric drives, tailored to each boat, and itself speaks of modern, quiet and sustainable propulsion. For owners who care above all about peace on board, this is the most consistent form of refit: instead of tuning out the engine, they enjoy the silence on the water.
Technology and speed
Other wishes concern what you feel when you are under way. Outdated switching technology can be renewed. Owners whose yacht is too slow, or who notice that it cannot cope with waves and wind, discuss a technical upgrade with the yard. For the engines, Werft 52 has specialised service technicians for Mercruiser, Mercury, Volvo Penta, Steyr and Nanni and direct access to the full range of Volvo Penta spare parts.
Canopy and fenders: the small annoyances
Some points on the list sound small and are still the most irritating in everyday use: a canopy that causes trouble when it is closed, or fenders that get in the way when they are stowed. Details like these show whether a yard listens. Werft 52 explicitly invites owners to share their experience and promises to find the right solution for them.
Light in the evening
And then there is the light. Among the yard’s refit pictures are a steering wheel in blue light and underwater lighting that makes the water at the stern glow blue at night. Details like these belong to the aesthetic finish the yard talks about. They turn an evening at anchor into a small occasion and show that a refit does not only repair a boat, it makes it more personal.
Light is especially striking under water. Lighting at the stern makes the water glow after sunset and turns the swim platform into a place where you still like to sit late in the evening.
Everything on one site
A refit needs different trades that work well together. At Werft 52, the yard’s own boatbuilder and its own boat painter work directly on site. There is also a crane for up to 20 tonnes, a transport system that moves yachts safely around the grounds and, in Kreuzlingen, the yard’s own rigging crane. The headquarters in Romanshorn, responsible for motorboats, has a heated workshop of 350 square metres; the branch in Kreuzlingen, responsible for sailing boats, a workshop of 450 square metres. The yard has been at home on the Swiss shore of Lake Constance for more than 40 years. It is a member of the Swiss motorboat association FSM and trains its own boatbuilders and boat technicians.
For owners on the lake this has a practical advantage. More than 185 boats are currently wintering in the yard’s halls and outdoor storage. If your boat is stored there anyway, you can schedule the refit for the months it spends ashore.
How a refit begins
A refit does not begin with an order but with a conversation. Owners who bring their list, what bothers them, what is missing and what could be nicer, give the yard the best basis. After that it becomes clear whether a partial renovation is enough or whether it will be a complete overhaul. André Vrecer is also a technical boat surveyor and prepares damage, purchase and valuation reports. In this way a refit can turn the yacht you know back into the one you once wished for.
Questions people ask
What is a refit?
The renovation of a yacht entirely to its owner’s wishes. It can be a partial renovation, of the electrics alone for example, or a complete overhaul. Werft 52 carries out refit work in steel, GRP and wood.
Which wishes can a refit at Werft 52 fulfil?
The yard names, among others, a wider swim platform, a door to the platform, a more comfortable stair to the aft deck, a quieter fresh water pump and quieter toilets, a canopy without trouble, better stowed fenders, new switching technology and more performance.
Can a yacht be converted to an electric drive?
Yes. Werft 52 is a dealer for ePropulsion and Mercury Avator and offers complete conversions, retrofits and service for electric drives, tailored to each boat.
Share













